... crack open a can of schadenfreude, Sig ...Component Failure In NASA’s Deep-Space Crew Capsule Could Take Months to Fixhttps://www.theverge.com/platform/amp/2020/11/30/21726753/nasa-orion-crew-capsule-power-unit-failure-artemis-iEngineers are racing to fix a failed piece of equipment on NASA’s future deep-space crew capsule Orion ahead of its first flight to space. It may require months of work to replace and fix. Right now, engineers at NASA and Orion’s primary contractor, Lockheed Martin, are trying to figure out the best way to fix the component and how much time the repairs are going to take.
In early November, engineers at Lockheed Martin working on Orion noticed that a power component inside the vehicle had failed, according to an internal email and an internal PowerPoint presentation seen by The Verge. Known as a power and data unit, or PDU, the component is a “main power/data boxes,” according to the email, responsible for activating key systems that Orion needs during flight.
NASA had planned to transfer the Orion capsule to the Multi-Payload Processing Facility (MPPF) at KSC on December 7th, though that rollout may be postponed due to this issue. When asked for a comment, NASA directed The Verge to a short blog post published today outlining the failure. Lockheed Martin did not respond to a request for comment ahead of publication.
https://blogs.nasa.gov/artemis/2020/11/30/update-on-orion-final-assembly-and-transfer/ Replacing the PDU isn’t easy. The component is difficult to reach: it’s located inside an adapter that connects Orion to its service module — a cylindrical trunk that provides support, propulsion, and power for the capsule during its trip through space.
To get to the PDU, Lockheed Martin could remove the Orion crew capsule from its service module, but it’s a lengthy process that could take up to a year.
As many as nine months would be needed to take the vehicle apart and put it back together again, in addition to three months for subsequent testing, according to the presentation.Lockheed has another option, but it’s never been done before and may carry extra risks, Lockheed Martin engineers acknowledge in their presentation. To do it, engineers would have to tunnel through the adapter’s exterior by removing some of the outer panels of the adapter to get to the PDU. The panels weren’t designed to be removed this way, but this scenario may only take up to four months to complete if engineers figure out a way to do it.
A third option is that Lockheed Martin and NASA could fly the Orion capsule as is. The PDU failed in such a way that it lost redundancy within the unit, so it can still function. But at a risk-averse agency like NASA, flying a vehicle without a backup plan is not exactly an attractive option. It’s still not clear what went wrong inside the unit, which was tested before it was installed on the spacecraft, according to a person familiar with the matter.
--------------------------------------------------------
... not their worst clusterfuck ...
Yes, it really happened.
It took place at the Lockheed Martin Space Systems factory in Sunnyvale, California. As the team was turning the satellite into a horizontal position, they found out that the twenty-four bolts that were supposed to hold it in place had been removed by a technician - and the action was never documented. ... https://www.nasa.gov/home/hqnews/2004/oct/HQ_n04158_noaa_n_mishap.htmlhttps://www.nasa.gov/pdf/65776main_noaa_np_mishap.pdf